The Frost Library: how contractor risk actually works.
A reference shelf for owners, CFOs and safety leads. Each entry explains one idea precisely (what it is, how it's calculated, what moves it) with a worked example and the sources behind it. Where a rule is state-specific, the entry says so and uses Arizona as the worked example; check your own state's rules. For step-by-step owner guides, see Resources.
42 entries, 82 defined terms, one method.
Start with total cost of risk if you're new: it's the number everything else rolls up into. Every figure is sourced to a regulator, a rating bureau or a statute, or labeled as an illustration. Last reviewed Oct 15, 2026.
Cost of risk
What risk really costs a contracting business, beyond the premium, and how to measure, compare and prove changes in that cost.
- Total cost of risk (TCOR) for contractorsTotal cost of risk (TCOR) is everything a business pays or loses in a year because risk exists: premiums, taxes and fees, retained and uninsured losses, the indirect cost of injuries, and what it spends to manage risk.
- Cost of risk rates and benchmarksA cost of risk rate divides total cost of risk by revenue, payroll or hours worked so it can be compared across years and similar companies.
- Indirect cost of workplace injuriesThe indirect cost of an injury is everything it costs the business beyond the claim itself, such as lost work time, overtime, replacement and retraining, supervisor time and damaged property.
- Spending to manage riskSpending to manage risk is the part of total cost of risk that goes to preventing and administering losses: your own staff's time, the safety program, risk technology and outside advisors.
- Risk baseline and verified savingsA risk baseline is a frozen, dated record of a business's starting cost of risk, used as the yardstick for every later improvement.
The insurance program
How a contractor's insurance program is put together: the lines it carries, how each premium is built, where policies are placed, what rides on top of the premium, and the renewal cycle that resets the price each year.
- Contractor insurance lines explainedA contractor's insurance program is a set of separate policies, called lines, and each one pays for a defined kind of loss and is priced on its own measure of exposure.
- How insurance premium is builtA commercial insurance premium is a chain of steps: exposure times rate gives the manual premium, which is then adjusted by the experience mod, schedule credits or debits, and a premium discount, before flat charges, fees and taxes are added.
- Admitted vs. surplus lines insuranceAn admitted insurer is licensed by the state, files its forms and rates, and is backed by the state guaranty fund.
- Commercial general liability (CGL) insuranceCommercial general liability (CGL) insurance pays when a business is legally responsible for injury to other people or damage to their property, from its premises, its operations, or work it has completed.
- Umbrella and excess liability insuranceUmbrella and excess liability policies add limits above a contractor's general liability, auto and employers liability policies.
- Broker compensation, fees and taxesWhat a contractor pays for insurance is more than the premiums.
- The insurance renewal timelineA commercial insurance renewal is a process that starts about 120 days before the policy expires, not a quote that arrives a few weeks out.
Workers' comp and the experience mod
How workers' compensation is priced for contractors, from class codes and payroll to the experience mod, and the records and habits that move it. Written for owners and finance leads, with NCCI rules cited and Arizona as the worked state; your state's rules may differ.
- Workers' comp class codes and payrollWorkers' comp premium starts with payroll sorted into class codes, each describing a kind of work with its own rate per $100 of payroll.
- The experience mod formulaThe experience mod compares a contractor's actual workers' comp losses over three prior policy years with the losses expected for its size and class mix.
- What moves the experience modThe experience mod moves mostly on how many claims you have, whether they stay medical-only, and how they are valued when the carrier reports them.
- The NCCI experience rating worksheetThe NCCI experience rating worksheet is the document that shows how your experience mod was calculated: payroll and expected losses by class, every claim with its primary and excess value, the rating values, and the final mod.
- The workers' comp premium auditA workers' comp policy is priced on estimated payroll and settled after it ends by a premium audit of actual payroll by class code.
- Return-to-work programs for contractorsA return-to-work program brings an injured employee back to suitable modified or light duty as soon as their doctor allows.
Retention and loss financing
How contractors pay for losses: what they keep through deductibles and retentions, what they transfer to carriers, and how loss runs, development and forecasting turn claim history into a decision.
- Deductibles vs self-insured retentionsUnder a deductible, the insurance carrier handles and pays the whole claim, then bills you back for your share.
- Loss runs: how to read oneA loss run is your insurance carrier's claim-by-claim history for a policy: each claim's dates, status, amount paid and amount still reserved, all as of one valuation date.
- Loss development factors (LDFs) explainedA loss development factor (LDF) is a multiplier that carries today's incurred losses to their expected final, or ultimate, cost.
- Loss forecasting and the loss pickA loss pick is the estimate of next year's expected losses, built from your past claims.
- Retention vs transfer: choosing what to keepRetention means paying some losses yourself, through a deductible, SIR or budget; transfer means paying a carrier or another party to carry them.
The risk management process
How risk managers think: the six-step process, the four classes of loss exposure, the eight techniques, and the tools that turn a loss history into a plan an owner can defend.
- The risk management process, step by stepThe risk management process is a six-step loop for deciding what a business will do about the losses it could suffer: identify loss exposures, analyze them, examine which techniques could treat them, select the best ones, implement them, and monitor results.
- Loss exposures: the four classesA loss exposure is any condition that presents the possibility of a loss, whether or not a loss ever happens.
- Risk control techniques and risk financingRisk control techniques change the loss itself: avoidance, loss prevention, loss reduction, separation, duplication and diversification.
- The frequency–severity matrixThe frequency–severity matrix plots how often a kind of loss happens against how bad one event is.
- Cost-benefit analysis of safety spendingCost-benefit analysis of safety asks whether a control returns more than it costs, measured in today's dollars.
- Risk register and risk appetiteA risk register lists each risk a business faces with its score before and after controls, the technique chosen, a named owner and a review date.
Safety and operations
The rules and measures behind a contractor's safety program: OSHA records and injury rates, the hazards that cause the worst losses, heat, fleets, and how to learn from every incident.
- OSHA recordkeeping and the 300 logUnder 29 CFR 1904, a contractor with more than 10 employees during the prior year must record work-related injuries that meet OSHA's recording criteria on the OSHA 300 log within 7 calendar days, back each one with a 301 report, and post the 300A annual summary from Feb 1 to Apr 30.
- TRIR and DART rates explainedTRIR (total recordable incident rate) is recordable cases times 200,000, divided by total hours worked.
- Construction fall protection rulesOSHA's construction fall protection rules (29 CFR 1926 Subpart M) require protection when a worker is 6 feet or more above a lower level, using guardrails, safety nets or a personal fall arrest system.
- The Construction Focus Four hazardsThe Construction Focus Four are the four hazards OSHA builds its construction outreach training around: falls, struck-by, caught-in or -between, and electrocution.
- Heat illness prevention in ArizonaAs of Oct 15, 2026, Arizona has no enforceable heat-specific standard.
- Fleet safety and driver qualification filesA driver qualification file is the record a motor carrier must keep for each driver of a commercial motor vehicle under 49 CFR 391.51: application, motor vehicle records, road test, annual review and medical certificate.
- Incident investigation and root cause analysisAn incident investigation finds out why an injury or near miss happened so it does not happen again.
Contracts and subcontractors
How construction contracts push the cost of a subcontractor's injuries and mistakes back onto the sub and its insurer. Certificates, endorsements, waivers, indemnity and the prequalification that makes them hold.
- Certificates of insurance (ACORD 25)A certificate of insurance (COI) is a one-page summary, usually on the ACORD 25 form, that a subcontractor's insurance agent issues to show what liability and workers' comp policies the sub carries.
- Additional insured endorsementsAn additional insured endorsement adds another party, such as a general contractor or owner, to a subcontractor's general liability policy for claims arising from the sub's work.
- Waiver of subrogation explainedSubrogation is an insurer's right, after paying a claim, to recover that money from whoever caused the loss.
- Indemnity clauses in Arizona construction contractsAn indemnity (hold-harmless) clause is a contract promise by one party to pay for and defend another against certain losses.
- Primary and noncontributory insurancePrimary and noncontributory wording makes a subcontractor's liability policy pay first for the general contractor as additional insured (primary) and bars it from asking the contractor's own policy to share the loss (noncontributory).
- Subcontractor prequalificationSubcontractor prequalification is the process a general contractor uses to confirm, before a sub is hired, that it is licensed, insured, safe and financially able to do the work.
The words, defined once.
Experience mod, split point, loss pick, additional insured, TRIR: 82 terms in plain English, each linked to the entry that explains it in full.
Want this run for your company?
Approved Frost agents deliver full-service fractional risk management on Frost: your total cost of risk, a plan with owners and documented savings, at a fraction of the cost of a risk department.
