Cost-benefit analysis of safety asks whether a control returns more than it costs, measured in today's dollars. It uses four tools: present value, net present value (NPV), the benefit-cost ratio and payback. The discount rate should be the owner's own cost of money, because it can change the answer.
What is cost-benefit analysis of safety?
Cost-benefit analysis compares what a control costs with what it is expected to save, so an owner can judge a safety investment the same way as a truck, an estimator or a paydown of the credit line. It closes step 3 of the risk management process: before choosing a control, price it.
The savings side usually comes from fewer or smaller losses: retained claim costs, a lower premium over time, and the indirect cost of injuries that no insurer pays. The cost side is the program itself, covered in spending to manage risk.
The key terms
- Discount rate. The rate that turns a future dollar into today's dollar. For a contractor, a fair choice is its cost of capital: what the bank charges on the line of credit, or the return the owner expects on money left in the business.
- Present value (PV). What a saving in year t is worth today: saving ÷ (1 + r)^t, where r is the discount rate.
- Net present value (NPV). The present value of all savings minus the present value of all costs. Above zero, the control earns more than the owner's money would elsewhere at that rate.
- Benefit-cost ratio. Present value of savings ÷ present value of costs. A ratio of 1.33 means $1.33 back for each $1.00 spent.
- Payback period. How long until cumulative, undiscounted savings cover the cost. It answers "when am I whole?", not "was it worth it?"
A worked example (illustrative numbers)
A safety control costs $50,000 up front and is expected to save $20,000 in year 1, $25,000 in year 2 and $30,000 in year 3. The owner's discount rate is 6%. The figures are illustrative.
Present value of each year's saving:
- Year 1: 20,000 ÷ 1.06 = $18,867.92
- Year 2: 25,000 ÷ 1.1236 = $22,249.91
- Year 3: 30,000 ÷ 1.191016 = $25,188.58
- Total PV of savings: 18,867.92 + 22,249.91 + 25,188.58 = $66,306.41
Then:
- NPV: 66,306.41 − 50,000 = +$16,306.41. Positive, so it pays at 6%.
- Benefit-cost ratio: 66,306.41 ÷ 50,000 = 1.33.
- Payback: cumulative net is −$50,000 at the start, −$30,000 after year 1 and −$5,000 after year 2. Year 3 brings $30,000, so the crossing comes 5,000 ÷ 30,000 = 0.17 of the way through year 3, a payback of 2.17 years.
- Undiscounted: 75,000 − 50,000 = $25,000 kept over three years.
Why does the discount rate matter so much?
Run the same control at 12%, the rate a contractor with an expensive credit line might pay:
- Year 1: 20,000 ÷ 1.12 = $17,857.14
- Year 2: 25,000 ÷ 1.2544 = $19,929.85
- Year 3: 30,000 ÷ 1.404928 = $21,353.41
- Total PV: $59,140.40, NPV +$9,140.40, benefit-cost ratio 1.18
Payback stays at 2.17 years because it ignores the rate. NPV falls by about $7,000 because later savings are worth less today. Whoever picks the rate has largely picked the answer, which is why the rate should be the owner's own number, supplied by the owner or the CPA, not chosen by the person selling the control.
Where do the savings estimates come from?
The arithmetic is only as good as the savings figures fed into it. Strong inputs tie to a document or a published study:
- Avoided indirect cost. OSHA's Safety Pays estimator multiplies an injury's direct cost by a ratio that falls as the claim gets bigger: 4.5 for direct costs under $3,000, 1.6 from $3,000 to $4,999, 1.2 from $5,000 to $9,999 and 1.1 at $10,000 and up. Two avoided $1,500 injuries are worth about 2 × 1,500 × 4.5 = $13,500 in indirect cost.
- Retained losses. Claims paid inside a deductible or retention come straight back to the business when they are avoided.
- Premium. Fewer claims lower the experience mod over the following years; what moves the experience mod explains the lag.
Weak inputs are a vendor's brochure percentage or a savings claim with no starting figure. Measure the starting point before the control goes in, so results can later be checked against a baseline.
Gross or net: which view should you show?
Two readers want two views. An underwriter wants to see what the controls remove from the cost of risk, gross of what the program costs. An owner wants to know what the business keeps after paying for the program, net and discounted. Both are true; they answer different questions. Show them side by side and never blend them into one figure.
What mistakes should you avoid?
- Showing payback alone. A two-year payback on a control that then stops working is not a good investment. NPV sees that; payback does not.
- Choosing the rate "to be conservative." Ask the owner what the bank charges, and use that.
- Presenting savings as if the program were free. State the program cost next to every saving.
- Ignoring timing. Some savings arrive this year (fewer injuries), others only after the mod recalculates. Put each saving in the year it can actually arrive.
Quick answers
How do you calculate the ROI of a safety program?
Estimate the yearly savings (avoided retained losses, indirect injury cost and premium), convert each year to present value at the owner's discount rate, and subtract the present value of the program's costs. A positive net present value means the program pays at that rate.
What discount rate should a contractor use?
Its own cost of money, such as the rate on its line of credit or the return the owner expects on retained cash. Ask your CPA if you are unsure; the rate can change the answer.
What is the difference between payback and NPV?
Payback tells you how long until the money is back, ignoring timing and anything after the crossing. NPV tells you whether the investment beats the owner's cost of money over its whole life.
- Net present value (NPV)
- The present value of a control's savings minus the present value of its costs, at the owner's discount rate. Above zero, the control pays at that rate.
- Payback period
- How long until cumulative, undiscounted savings cover a control's cost. It says when the money is back, not whether the investment was worth it.
- Indirect cost of an injury
- What an injury costs the business beyond the claim, such as lost time, overtime, replacement and retraining, supervisor time and damaged property. No policy pays it.
- Safety Pays: background of cost estimates · OSHA
- CPCU 551 excerpt: the risk management process · The Institutes
- Risk Management Alternatives: The Risk Management Matrix · Saylor Academy (open textbook)
Worked examples use illustrative numbers unless a source is named. This entry explains general concepts; it isn't legal, tax or coverage advice for a specific policy or contract.