Additional insured endorsements

In short

An additional insured endorsement adds another party, such as a general contractor or owner, to a subcontractor's general liability policy for claims arising from the sub's work. Construction contracts usually need two: one for ongoing operations (ISO CG 20 10 or an automatic-status form) and one for completed operations (ISO CG 20 37), and the edition matters because each revision has narrowed the coverage.

When a subcontractor's worker or a member of the public is hurt by a sub's work, the lawsuit usually names everyone up the chain: the sub, the general contractor and the owner. An additional insured is a party that is not the policyholder but has been added to the policy, by endorsement, so the sub's insurer defends and pays for it on claims connected to the sub's work. An endorsement is a written change to a policy, attached to it and part of it.

Additional insured status is the most important piece of subcontractor risk transfer, because it puts the general contractor inside the sub's commercial general liability policy instead of relying on the sub's promise to pay.

What are ongoing and completed operations?

Claims against contractors arrive at two different times, and the standard endorsements split along that line.

  • Ongoing operations means work in progress. A sub's worker drops a load from a lift and injures a passer-by while the job is underway.
  • Completed operations means claims that arise after the work is finished and turned over. A balcony a framer built fails eighteen months after the owner moved in.

A contractor that has only ongoing-operations coverage has no additional insured protection for the second claim, which in construction defect cases is often the larger one.

Which ISO forms are used?

Most US liability policies are built on forms from ISO (Insurance Services Office), which carriers use as is or modify. The ones a contractor sees most often:

  • CG 20 10, Additional Insured, Owners, Lessees or Contractors, Scheduled Person or Organization. Ongoing operations for a party named in the schedule.
  • CG 20 37, the matching completed operations form for a scheduled party.
  • CG 20 33, automatic additional insured status for a party the sub contracts with directly, when a written construction agreement requires it. Ongoing operations only.
  • CG 20 38, automatic status that can also reach parties further up the chain, such as the owner, when the written construction agreement requires it. Ongoing operations only.
  • CG 20 39 and CG 20 40, automatic-status completed operations forms that ISO introduced in its 2019 filing.

Blanket (automatic) forms are popular because nobody has to remember to schedule each general contractor by name. The trade-off is that they turn on the written contract: no signed agreement requiring the coverage, no additional insured status.

Why does the edition date matter?

Every ISO form carries an edition date in its footer, written as month and year (for example, CG 20 10 04 13 is the April 2013 edition). The coverage has narrowed over time:

  • 2001. The ongoing operations form added explicit completed operations exclusions, and CG 20 37 was created to give that coverage back separately.
  • 2004. "Arising out of" the sub's work was replaced with injury "caused, in whole or in part," by the sub's acts or omissions. The general contractor's sole negligence is no longer covered.
  • 2013. Three limits were added: coverage applies only as far as the law allows; it is no broader than the contract requires; and the limit is the lesser of what the contract requires or the policy limits.
  • 2019 (effective December 1, 2019). The limits wording was revised again, to the amount "available under the applicable limits" of the policy, across many additional insured forms.

Carriers usually issue only their current edition. If your contract names an older edition, the sub may not be able to supply it. Ask your attorney to align the contract with what is actually available.

A worked example: the lesser-of-limits rule (illustrative numbers)

A general contractor's subcontract requires the sub to carry $1,000,000 per occurrence and name the contractor as additional insured. The sub actually carries $2,000,000 per occurrence on a 2013-edition endorsement.

  1. A passer-by sues the contractor and the sub for $1,600,000 over a falling-object injury caused by the sub's crew.
  2. Under the 2013 wording, the additional insured limit is the lesser of the contract requirement ($1,000,000) and the policy limit ($2,000,000), so $1,000,000.
  3. The remaining $600,000 falls to the contractor's own general liability policy or its umbrella.

Had the subcontract required $2,000,000, the full $1,600,000 would have been within the sub's coverage. The contract's limit requirement now sets the ceiling on what the contractor can recover as an additional insured, which is why the insurance section of a subcontract deserves the same attention as the price.

What should a contractor collect?

  • The endorsement pages themselves, not just a certificate of insurance with a checked box.
  • Both ongoing and completed operations coverage, with completed operations lasting as long as the contract requires.
  • Primary and noncontributory wording, so the sub's policy pays first.
  • Matching coverage on the sub's umbrella or excess policy if the contract requires it.

What the subcontract should require, and in what words, is a question for your construction attorney. For the checklist side, see contract insurance requirements.

Quick answers

What is the difference between CG 20 10 and CG 20 37?

CG 20 10 covers the additional insured for the sub's ongoing operations, while work is in progress. CG 20 37 covers completed operations, claims that arise after the work is finished, and contractors usually need both.

Does additional insured status cover my own negligence?

Under the 2004 and later ISO editions, only for injury caused in whole or in part by the sub's acts or omissions. A loss caused entirely by the general contractor's own negligence is generally outside it.

What is a blanket additional insured endorsement?

An endorsement that automatically makes a party an additional insured when a written contract requires it, without naming that party on the policy. ISO's versions include CG 20 33 and CG 20 38 for ongoing operations and CG 20 39 and CG 20 40 for completed operations.

Terms in this entry
Additional insured
A party added by endorsement to someone else's liability policy, so that policy defends and pays for it on claims connected to the policyholder's work.
Ongoing operations
Work that is still in progress. Additional insured coverage for ongoing operations (for example ISO CG 20 10) responds to claims that arise while the job is underway.
Completed operations
Claims that arise after the work is finished and turned over, such as a defect that causes injury a year later. Additional insured coverage for it needs its own endorsement, such as ISO CG 20 37.
Sources and standards
  1. History of ISO Additional Insured Endorsements · IRMI
  2. 2013 ISO Additional Insured Endorsements: Putting the Changes into Context for the Construction Industry · IRMI
  3. The 2019 ISO Additional Insured Endorsements · Independent Insurance Agents & Brokers of America (Virtual University)
  4. CG 20 10: Additional Insured - Owners, Lessees or Contractors - Scheduled Person or Organization (edition list) · InsuranceXDate

Worked examples use illustrative numbers unless a source is named. This entry explains general concepts; it isn't legal, tax or coverage advice for a specific policy or contract.

Brandon Junkin
Brandon Junkin, Founder of Frost

I built Frost, the risk management platform approved insurance agents use to run contractor risk programs. Seven years in IT taught me to fix the cause, not the symptom. More about Frost

Related in the Library
Contracts and subcontractorsCertificates of insurance (ACORD 25)A certificate of insurance (COI) is a one-page summary, usually on the ACORD 25 form, that a subcontractor's insurance agent issues to show what liability and workers' comp policies the sub carries.Contracts and subcontractorsPrimary and noncontributory insurancePrimary and noncontributory wording makes a subcontractor's liability policy pay first for the general contractor as additional insured (primary) and bars it from asking the contractor's own policy to share the loss (noncontributory).Contracts and subcontractorsWaiver of subrogation explainedSubrogation is an insurer's right, after paying a claim, to recover that money from whoever caused the loss.Contracts and subcontractorsIndemnity clauses in Arizona construction contractsAn indemnity (hold-harmless) clause is a contract promise by one party to pay for and defend another against certain losses.The insurance programCommercial general liability (CGL) insuranceCommercial general liability (CGL) insurance pays when a business is legally responsible for injury to other people or damage to their property, from its premises, its operations, or work it has completed.Resources · 5 min guideInsurance requirements in construction contracts, explained in plain EnglishThe insurance section of a contract makes promises about your policies. Here's what each common term means, and why someone needs to check that your coverage matches before you sign.Resources · topicSubcontractors, contracts and certificates of insuranceSubs, certificates and the contracts you sign can quietly cost you money long after a job closes. Learn what the paperwork really proves and how to give it one owner.

Want this run for your company?

Approved Frost agents deliver full-service fractional risk management on Frost: your total cost of risk, a plan with owners and documented savings, at a fraction of the cost of a risk department.

Find an approved agent