The risk management process, step by step

In short

The risk management process is a six-step loop for deciding what a business will do about the losses it could suffer: identify loss exposures, analyze them, examine which techniques could treat them, select the best ones, implement them, and monitor results. ISO 31000 and COSO describe the same loop in different words. The order matters more than any single step.

What is the risk management process?

Risk management is deciding, on purpose, what a business will do about the losses it could suffer: which to prevent, which to shrink, which to insure and which to carry itself. The risk management process is the method for making those decisions in a fixed order, so nothing is chosen before it is understood.

The Institutes, the education body behind the ARM and CPCU designations, teach the process in six steps. Each step produces something the next one needs.

What are the six steps?

  1. Identify loss exposures. List every way the business could lose money: injuries, lawsuits, damaged equipment, contract promises, a stopped job. A loss exposure is any condition that presents the possibility of a loss, whether or not one ever happens. See loss exposures for the four classes.
  2. Analyze the loss exposures. Measure them: how often a loss happens, how bad one can get, and what they cost today.
  3. Examine the feasibility of risk management techniques. For each exposure, ask which techniques could work and what each would cost against what it would save. There are eight: six that change the loss and two that pay for it, covered in risk control techniques.
  4. Select the most appropriate techniques. Decide, and write each decision down with an owner and a date.
  5. Implement the selected techniques. Do the work: the procedure, the training, the contract language, the policy change.
  6. Monitor results and revise. Measure whether it worked, then go around again. Exposures change with every new job type and every new crew.

Owners usually recognize the six steps in plain words: what could hurt us, how badly, what could we do about it, what will we do, who does it by when, and did it work.

How do ISO 31000 and COSO describe the same thing?

ISO 31000 is the international risk management standard, first published in 2009 and revised in 2018. It groups steps 1 to 3 as risk assessment (identification, analysis and evaluation), then risk treatment, then monitoring and review, with communication and record-keeping running alongside the whole loop.

COSO (the Committee of Sponsoring Organizations, best known to CFOs and auditors for its internal control framework) publishes an enterprise risk management framework that wraps the same loop in governance, strategy and reporting. It adds the idea of a stated risk appetite, which is covered in risk registers and risk appetite.

Different vocabulary, one method. A risk manager trained on any of the three would recognize the others.

A worked example (illustrative numbers)

Here is one trip around the loop for a hypothetical specialty contractor. The figures are illustrative, not drawn from any real company.

  1. Identify. The owner's records show $120,000 a year paid to subcontractors who never produced a certificate of insurance, and four minor injuries a year among its own crews.
  2. Analyze. At the workers' comp audit, the carrier can treat payments to uninsured subs as the contractor's own payroll. At a class rate of $9.00 per $100 of payroll and an experience mod of 1.10, that is 120,000 ÷ 100 × 9.00 × 1.10 = $11,880 of added premium. The minor injuries average $1,200 in direct cost.
  3. Examine feasibility. Collecting valid certificates before the first invoice is paid removes the $11,880 charge. Cutting minor injuries from four to two avoids OSHA's estimated indirect cost on each: for injuries under $3,000, OSHA's Safety Pays estimator uses a ratio of 4.5, so (4 − 2) × $1,200 × 4.5 = $10,800 a year in lost time, supervision and paperwork that no insurer pays.
  4. Select. The owner commits to both: the office manager owns certificate collection, the superintendent owns a pre-shift orientation.
  5. Implement. A certificate checklist goes into accounts payable; orientation is scheduled for every new hire.
  6. Monitor. The next premium audit shows no uninsured-sub charge, and the injury log is checked each quarter against the target of two.

Notice where the dollars appear: steps 2 and 3. The other four steps are lists, decisions and proof. A plan that starts at step 3 has nothing to stand on; one that stops at step 5 has nothing to show.

Which steps get skipped most often?

Much of the insurance industry runs steps 1, 2 and 5 once a year: gather the application, look at the loss history, place the policies. Steps 3, 4 and 6 are the ones that turn a renewal into a plan.

  • Step 3 is where a recommendation becomes a decision the owner can defend, because each option has a price and an expected return. Cost-benefit analysis is the arithmetic.
  • Step 4 is where the decision gets an owner and a deadline. Without one, a good idea stays an idea.
  • Step 6 is where a claimed saving becomes a measured one. Without a starting figure, nobody can prove anything changed.

Why does the order matter?

You cannot analyze what you have not identified, choose a technique you have not priced, or prove what you never measured at the start. Most shortcuts are a step taken out of order: a higher deductible recommended before anyone has looked at how often losses happen, a safety program bought before anyone knows which cause of loss is frequent, or a savings claim with no baseline behind it.

The process is also a circle, not a line. Step 6 feeds step 1: new work, new crews and new contracts create new exposures, so the register of what could go wrong has to be reread on a schedule. This loop is the method a Frost program is built on, and a disciplined owner can run it with a spreadsheet and a folder.

Quick answers

What are the steps of the risk management process?

The Institutes teach six: identify loss exposures, analyze them, examine the feasibility of risk management techniques, select the most appropriate ones, implement them, and monitor results and revise. Some references fold selection into the feasibility step and list five.

How does ISO 31000 describe the risk management process?

ISO 31000:2018 groups identification, analysis and evaluation as risk assessment, followed by risk treatment and then monitoring and review, with communication and recording and reporting running throughout. It is the same loop under different names.

Is buying insurance the same as risk management?

No. Insurance is one technique (transfer) used in step 5 of a six-step process. Risk management also decides which losses to prevent, which to shrink and which to keep, and then measures whether the plan worked.

Terms in this entry
Risk management process
The six-step loop for deciding what to do about possible losses: identify loss exposures, analyze them, examine techniques, select, implement, and monitor and revise.
Loss exposure
Any condition or situation that presents the possibility of a loss, whether or not a loss ever happens. Crews working at height are an exposure; the fall is the loss.
Risk appetite
The types and amount of risk a business is willing to accept in pursuit of its goals, best written with numbers so each risk can be tested against it.
Sources and standards
  1. CPCU 551 excerpt: the risk management process · The Institutes
  2. ISO's Risk Management Framework (ISO 31000:2018) · NC State University ERM Initiative
  3. Risk Appetite: Critical to Success · COSO
  4. Safety Pays: background of cost estimates · OSHA
  5. The Institutes' new Associate in Risk Management (ARM) · The Institutes

Worked examples use illustrative numbers unless a source is named. This entry explains general concepts; it isn't legal, tax or coverage advice for a specific policy or contract.

Brandon Junkin
Brandon Junkin, Founder of Frost

I built Frost, the risk management platform approved insurance agents use to run contractor risk programs. Seven years in IT taught me to fix the cause, not the symptom. More about Frost

Related in the Library

Want this run for your company?

Approved Frost agents deliver full-service fractional risk management on Frost: your total cost of risk, a plan with owners and documented savings, at a fraction of the cost of a risk department.

Find an approved agent