TRIR (total recordable incident rate) is recordable cases times 200,000, divided by total hours worked. DART uses only the cases with days away, restricted work or job transfer. The 200,000 is 100 full-time workers for a year, so both rates read as cases per 100 workers.
What are TRIR and DART?
TRIR (total recordable incident rate) and the DART rate (days away, restricted or transferred) turn a company's injury count into a rate that can be compared across companies of any size. Both come straight from the OSHA 300 log and the company's payroll hours.
- TRIR counts every recordable case.
- DART counts only the more serious recordables: cases where the worker missed days, worked restricted duty, or was moved to another job.
DART is always equal to or lower than TRIR, because its cases are a subset of the recordables.
How is TRIR calculated?
The Bureau of Labor Statistics publishes the formula, and it is the same one OSHA uses:
- TRIR = recordable cases × 200,000 ÷ total hours worked by all employees.
- DART = (days-away cases + restricted or transferred cases) × 200,000 ÷ total hours worked.
The 200,000 is a fixed base. It equals 100 employees working 40 hours a week for 50 weeks a year. Multiplying by it converts a raw count into "cases per 100 full-time workers per year," so a 30-person electrician and a 600-person general contractor can be read on the same scale.
A worked example
Illustrative numbers. A specialty contractor's 300A for last year shows 3 recordable cases. One had days away from work and one had restricted duty. Payroll records show 90,000 hours worked.
- TRIR = 3 × 200,000 ÷ 90,000 = 600,000 ÷ 90,000 = 6.67.
- DART = (1 + 1) × 200,000 ÷ 90,000 = 400,000 ÷ 90,000 = 4.44.
- Hours of 90,000 are about 45 full-time workers (90,000 ÷ 2,000).
Now notice how sensitive the rate is. At 90,000 hours, each recordable case is worth 200,000 ÷ 90,000 = 2.22 points of TRIR. One fewer case would have dropped the rate from 6.67 to 4.44. One more would have pushed it to 8.89.
How do construction rates compare?
The BLS Survey of Occupational Injuries and Illnesses gives the national benchmark. For 2024, the most recent year published, the rates for private construction were:
- Construction overall (NAICS 23): TRIR 2.2, DART 1.3.
- Construction of buildings (NAICS 236): TRIR 2.2, DART 1.3.
- Specialty trade contractors (NAICS 238): TRIR 2.3, DART 1.4.
BLS also publishes rates for narrower trades, and a company should compare itself with its own trade where possible. The example company's 6.67 is about three times the specialty trade average of 2.3, which is the kind of gap that gets noticed in a prequalification review.
Why does one year mislead for a small company?
For a company working under about 200,000 hours a year, a single case moves TRIR by a full point or more. A 20-person firm can post a 0.0 one year and a 5.0 the next with no real change in how it works.
Three habits keep the number honest:
- Report the three-year rate beside the annual one. Add the cases for three years and divide by the hours for three years; do not average three annual rates.
- Use hours from payroll, not headcount times 2,000. Seasonal crews, overtime and part-timers make headcount a poor denominator.
- Classify cases correctly. A first-aid case counted as recordable inflates the rate; a recordable left off the log understates it and creates a records problem.
Who uses TRIR and DART, and how?
General contractors and project owners ask for three years of TRIR, DART and the experience mod during subcontractor prequalification. Some set hard cutoffs, sometimes tied to the industry average for the trade. Underwriters read the rates next to the loss runs, and a gap between the two usually starts a conversation.
The rates also feed the money side. Lost-time and restricted cases are the ones that become larger workers' comp claims, and more claims tend to push up the experience mod a year or two later. Small recordables that never become large claims still carry real costs, covered in the indirect cost of injuries.
TRIR, DART and the experience mod are different numbers
TRIR and DART measure how often people get hurt, per hour worked. The experience mod measures how a company's workers' comp losses compare with what is expected for its payroll and trades, over three completed policy years. A company can have a low TRIR and a high mod (one severe claim) or a high TRIR and an average mod (many small, cheap cases). Read them together. This trio is the safety scorecard a Frost program tracks year over year.
Quick answers
What is a good TRIR for construction?
BLS put private construction at a TRIR of 2.2 and specialty trade contractors at 2.3 for 2024. Each GC sets its own cutoff, and some tie it to the industry average for your trade.
What does the 200,000 in the TRIR formula mean?
It is the hours 100 full-time employees work in a year (100 × 40 hours × 50 weeks). Multiplying by it turns your count into cases per 100 full-time workers.
What is the difference between TRIR and DART?
TRIR counts all recordable cases. DART counts only cases with days away from work, restricted duty or a job transfer, so it measures the more serious injuries.
- TRIR (total recordable incident rate)
- Recordable cases times 200,000, divided by total hours worked. It reads as recordable injuries per 100 full-time workers per year.
- DART rate
- Cases with days away, restricted work or job transfer, times 200,000, divided by total hours worked. It measures the more serious recordable injuries.
- Recordable case
- A work-related injury or illness that results in death, days away, restricted work or transfer, medical treatment beyond first aid, loss of consciousness, or a significant diagnosed condition. It must go on the OSHA 300 log.
- Experience mod (EMR)
- A multiplier on workers' comp premium comparing your actual losses over three prior policy years with the losses expected for your size and class mix. 1.00 is average; above it is a debit, below it a credit.
- Subcontractor prequalification
- The review a general contractor completes before hiring a sub: license, insurance and endorsements, safety record, safety program, financial capacity and experience.
- How to compute a firm's incidence rate for safety management · U.S. Bureau of Labor Statistics
- Table 1. Incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024 · U.S. Bureau of Labor Statistics
- Employer-Reported Workplace Injuries and Illnesses, 2023-2024 · U.S. Bureau of Labor Statistics
- 29 CFR Part 1904: Recording and Reporting Occupational Injuries and Illnesses · eCFR (National Archives)
Worked examples use illustrative numbers unless a source is named. This entry explains general concepts; it isn't legal, tax or coverage advice for a specific policy or contract.