Indirect cost of workplace injuries

In short

The indirect cost of an injury is everything it costs the business beyond the claim itself, such as lost work time, overtime, replacement and retraining, supervisor time and damaged property. No insurance policy pays it. OSHA's $afety Pays program estimates it with ratios that run from 4.5 times direct cost for small claims down to 1.1 times for claims of $10,000 or more.

What is the indirect cost of an injury?

When a worker gets hurt, the claim itself (medical bills and wage replacement) is the direct cost of an injury. If the business carries workers' comp, the insurance company pays it.

Everything else the injury costs the business is the indirect cost of an injury. The supervisor spends the afternoon on the incident. The crew stops work. Someone works overtime or a replacement is hired and trained. Tools or material get damaged. The schedule slips, and the owner spends hours with the adjuster. No policy pays for any of it. It lands on the books as lower productivity and higher cost of work, and nobody labels it.

How does OSHA estimate it?

OSHA's $afety Pays program sizes the indirect cost with an indirect cost ratio: a multiplier applied to the direct cost. The ratio falls as claims get bigger:

  • Direct cost of $0 to $2,999: ratio 4.5
  • $3,000 to $4,999: ratio 1.6
  • $5,000 to $9,999: ratio 1.2
  • $10,000 or more: ratio 1.1

OSHA lists what these estimates are meant to cover, including wages for uncovered absences, lost work time from the stoppage, overtime, supervisor and clerical time, training replacement workers, lost productivity, and cleanup, repair and replacement of damaged property. The average direct costs behind the tool come from NCCI data on lost-time workers' comp claims for policy years 2015 to 2017.

OSHA presents the tool as a way to raise awareness of how injuries affect profit, not as a detailed cost study for a specific company. Use it the same way: as a named, sourced estimate.

Why do small injuries carry the biggest ratio?

A small injury stops the crew, generates paperwork and pulls a supervisor off the job much like a serious one. Its medical bill, though, is small. So the ratio of disruption to bill is large. A $1,500 sprain carries an estimated $6,750 of indirect cost (1,500 × 4.5). A $60,000 injury carries an estimated $66,000 (60,000 × 1.1): far more in dollars, but close to one-for-one.

This is why preventing frequent minor injuries often pays back faster than owners expect, and why the injuries that never make it past first aid still deserve attention in your OSHA 300 log and your incident reviews.

A worked example (illustrative numbers)

An illustrative contractor had six minor injuries last year averaging $1,500 in direct cost, and one serious injury with $60,000 in direct cost.

  1. Minor injuries: 6 × 1,500 = $9,000 direct; 9,000 × 4.5 = $40,500 indirect
  2. Serious injury: $60,000 direct; 60,000 × 1.1 = $66,000 indirect
  3. Total indirect cost: 40,500 + 66,000 = $106,500

If this contractor's total cost of risk is $617,950, the indirect cost is 106,500 ÷ 617,950 = 17.2% of it. Spread over 120,000 hours worked, it is about $0.89 an hour.

OSHA's worksheet also translates cost into sales: divide the cost by your profit margin to see how much extra revenue it takes to cover it. At an illustrative 5% margin, $106,500 of indirect cost equals the profit on 106,500 ÷ 0.05 = $2,130,000 of sales.

Insured or retained: what does avoiding an injury save?

Whether the direct cost counts depends on who pays it. Count the direct cost only when the business pays it itself, inside a deductible, a self-insured retention, or on a loss no policy covers. Otherwise, count only the indirect cost. The difference is explained in deductibles vs self-insured retentions.

Take one avoided $1,500 injury:

  • Guaranteed-cost workers' comp (the carrier pays the claim): the saving this year is the indirect cost, 1,500 × 4.5 = $6,750. The carrier would have paid the $1,500.
  • Deductible above $1,500 (the business pays the claim): the saving is 6,750 + 1,500 = $8,250.

The indirect cost is the same in both cases. That is the point: even a fully insured contractor carries this cost, which is why it belongs in TCOR at all.

There is also a later effect. Lost-time claims feed the experience mod, which NCCI generally builds from three years of data and which excludes the current policy. So an injury avoided this year also shows up in premium, but at a later renewal.

Using the estimate honestly

A few rules keep this number credible with owners, CPAs and underwriters:

  • Say it is an estimate. It is a ratio with a named public source, not a measured figure.
  • Never add the direct cost of an insured claim on top. The premium already pays for it.
  • Do not count injury absence twice. The ratio already includes lost time and replacement labor, so leave it out of internal staff cost.
  • Use the right band. The 4.5 ratio applies only under $3,000. A large claim carries 1.1.

Getting people back to productive work sooner shrinks several of these costs at once; see return-to-work programs. For the owner's view of these costs, read the hidden cost of risk.

Quick answers

What are the indirect costs of a workplace injury?

Costs no policy pays: lost productivity, overtime, hiring and training a replacement, supervisor and clerical time, work stoppage, and repairing or replacing damaged property. OSHA's estimates include these kinds of costs.

What is OSHA's indirect cost ratio?

OSHA's $afety Pays uses a sliding scale: 4.5 for direct costs up to $2,999, 1.6 for $3,000 to $4,999, 1.2 for $5,000 to $9,999, and 1.1 for $10,000 or more.

Are indirect injury costs covered by workers' comp?

No. Workers' comp pays the direct cost of the claim, such as medical care and wage replacement. The disruption to the business is paid by the business.

Terms in this entry
Direct cost of an injury
The claim itself: medical bills and wage replacement. Workers' comp pays it unless the business retains it through a deductible or retention.
Indirect cost of an injury
What an injury costs the business beyond the claim, such as lost time, overtime, replacement and retraining, supervisor time and damaged property. No policy pays it.
Indirect cost ratio
OSHA's multiplier for estimating indirect injury cost from direct cost, from 4.5 for claims under $3,000 down to 1.1 for claims of $10,000 or more.
Deductible
The first part of an insured claim the policyholder pays. On liability and workers' comp the carrier usually pays the claim in full and bills the deductible back.
Self-insured retention (SIR)
An amount the insured pays and handles itself before the policy responds at all. Coverage applies only above the retention.
Guaranteed cost
A policy with no meaningful retention: the carrier pays the claims and the policyholder's cost is the premium.
Experience mod (EMR)
A multiplier on workers' comp premium comparing your actual losses over three prior policy years with the losses expected for your size and class mix. 1.00 is average; above it is a debit, below it a credit.
Sources and standards
  1. Individual Injury Estimator: Background of Cost Estimates · OSHA $afety Pays
  2. $afety Pays: Estimated Costs of Occupational Injuries and Illnesses (worksheet text) · OSHA
  3. ABCs of Experience Rating · NCCI

Worked examples use illustrative numbers unless a source is named. This entry explains general concepts; it isn't legal, tax or coverage advice for a specific policy or contract.

Brandon Junkin
Brandon Junkin, Founder of Frost

I built Frost, the risk management platform approved insurance agents use to run contractor risk programs. Seven years in IT taught me to fix the cause, not the symptom. More about Frost

Related in the Library
Cost of riskTotal cost of risk (TCOR) for contractorsTotal cost of risk (TCOR) is everything a business pays or loses in a year because risk exists: premiums, taxes and fees, retained and uninsured losses, the indirect cost of injuries, and what it spends to manage risk.Retention and loss financingDeductibles vs self-insured retentionsUnder a deductible, the insurance carrier handles and pays the whole claim, then bills you back for your share.Workers' comp and the experience modReturn-to-work programs for contractorsA return-to-work program brings an injured employee back to suitable modified or light duty as soon as their doctor allows.The risk management processCost-benefit analysis of safety spendingCost-benefit analysis of safety asks whether a control returns more than it costs, measured in today's dollars.Safety and operationsOSHA recordkeeping and the 300 logUnder 29 CFR 1904, a contractor with more than 10 employees during the prior year must record work-related injuries that meet OSHA's recording criteria on the OSHA 300 log within 7 calendar days, back each one with a 301 report, and post the 300A annual summary from Feb 1 to Apr 30.Resources · 5 min guideWhat insurance really costs a contractor: the hidden billThe premium is the smallest honest number in your business. Here's where the rest of the bill hides, and why it matters to your net operating income.Resources · 5 min guideWhat to do after a workplace injury: the first 72 hoursWhat happens right after an injury shapes what that claim will cost. Here's how to get it right.Resources · 5 min guideNew hire safety for contractors: the first 90 daysNew hires carry a big share of construction injuries and claim costs. Here's what their first 90 days should look like instead.

Want this run for your company?

Approved Frost agents deliver full-service fractional risk management on Frost: your total cost of risk, a plan with owners and documented savings, at a fraction of the cost of a risk department.

Find an approved agent