It's 6:40 on a Monday.
A new laborer stands at the gate with a hard hat that still has the sticker on it. The foreman is on the phone with the concrete supplier. The crew is already moving. Somebody says, "Grab that and follow him."
That's orientation.
Picture that same Monday on a hundred job sites. Now look at the numbers.
How many construction injuries happen in the first year?
44% of construction injuries happened to workers in their first year on the job, and those injuries drove 47% of construction workers' comp claim costs (Travelers 2026 Injury Impact Report, 1.2 million+ claims, 2021 to 2025).
Read that slowly. The people with the least experience, the least context and the least confidence to speak up carry close to half the injuries and close to half the claim costs.
And most companies hand them a hard hat and a start time.
Why new hires get hurt
Nobody puts a new hire in harm's way on purpose. It happens through small gaps:
- They don't know the site yet: the hazards, the equipment that's out of service, who to ask
- They don't want to look slow, so they don't ask
- They learn from whoever is next to them, good habits or bad
- The crew is busy, so training happens "as we go"
Everyone means well. And the first injury happens in week two.
What a first-year injury really costs
Say that laborer cuts his hand in week two. A few stitches. Back the next day.
A small injury (under $3,000) can cost about 4.5 times the medical bill in hidden cost: lost time, a crew slowed down, a supervisor filling out reports instead of running the job. More on that in the hidden cost of risk.
If it becomes a claim, it can ride on your experience mod for three years.
And then there's him. A first injury is often the moment a new hire decides whether this is a place to stay. Lose him, and you're hiring another first-year worker to replace him. That's the loop that keeps the number high, and it's why turnover is a cost of risk.
Multiply that across a year of hiring and the math gets real fast. A handful of small injuries, a claim or two on the mod, and a few new hires who leave after their first scare. Each one starts the cycle again.
For the owner, it feels like bailing water. You spend on gear and training and still can't tell whether any of it reaches the new guy at the gate.
The people doing the work deserve a plan. Especially on day one.
What should the first 90 days look like?
I grew up with a single mom. Life sometimes felt impossible, but I always had someone in my corner. A new hire on a job site needs the same thing: one person whose job is to have their back. — Brandon Junkin, founder of Frost
Here's a useful frame. The first 90 days are their own phase, with their own plan and their own owner.
Before day 1
- A short orientation on your rules, your sites and how to report an injury
- Gear issued and fitted
- A name: the person they go to with questions
Day 1 to day 7
The first week is about the site, not the work.
- A walk-through of this job site: hazards, exits, equipment
- Paired with an experienced worker, by name
- Permission, out loud, to stop and ask
That last one matters. New workers need to hear that stopping to ask is part of the job. It's also how injuries get reported early, which matters a lot in the first 72 hours of a claim.
Day 8 to day 30
- The mentor checks in daily, briefly
- The supervisor checks in at week two and week four
- New tasks get shown before they get assigned
Day 31 to day 90
- A real conversation at day 30, 60 and 90: what's going well, what's confusing, what feels unsafe
- A first look at the path up: what they could be doing in a year
People stay where they can see a future. Every person who stays is one fewer first-year worker next year.
Why mentoring is the multiplier
If you only do one thing on this list, make it the mentor.
A good mentor teaches the work. Teaches the habits that never make it into a manual. And gives a new hire someone to talk to before a small problem becomes a quit.
The mentor needs two things from you: real time to do it, and recognition for doing it well. If mentoring is a favor squeezed between real work, it won't last.
How to measure new hire safety
- First-year injuries, including first aid, as a share of all injuries
- New hires still with you at 90 days
- New hires still with you at 12 months
Track them every quarter. If the first number is high and the other two are low, onboarding is costing you twice.
Try this
Pull a list of everyone you hired in the last 12 months. For each person:
- Did they get hurt, even first aid, in their first 90 days?
- Are they still here?
- Who was their mentor? If you can't answer, that's the answer.
Then write down what actually happens on a new hire's first day. Not what's supposed to happen. What actually happens.
Do it on purpose, and the scene changes. The new laborer meets his mentor at the gate. He walks the site before he touches a tool. He knows who to tell when something feels wrong.
A name.
A walk-through.
A path up.
That's a company that grows safer as it grows bigger.
Where to start
Ask your broker or risk advisor to show you where your injuries come from and who's carrying them. From there, a Baseline adds up what risk really costs you, including new-hire injuries, and a 90-day plan puts an owner and a date on every task, with signed proof of every saving. Approved Frost agents run this kind of program for contractors, start to finish.
The reference entries behind this page: definitions, the math and the sources.
Heat illness prevention in ArizonaIndirect cost of workplace injuriesReturn-to-work programs for contractorsOSHA recordkeeping and the 300 logTRIR and DART rates explainedConstruction fall protection rulesBrowse the whole Library →Quick answers
What share of construction injuries happen to first-year workers?
44% of construction injuries happened to workers in their first year on the job, and those injuries drove 47% of construction workers' comp claim costs, according to the Travelers 2026 Injury Impact Report (1.2 million+ claims, 2021 to 2025).
How long should onboarding last for a contractor's new hire?
Treat the first 90 days as their own phase: orientation before day 1, a site-focused first week with a named mentor, regular check-ins through day 30, and real conversations at day 30, 60 and 90.
Do first-aid incidents count when tracking new hire safety?
Yes. Include first aid when you count first-year injuries. Small incidents show you where the gaps are before they become claims.